1/2” 110V AC Brass Electric Solenoid Valve Water Air Gas Fuel Normally Close N/C

Description

This product adopts industrial-grade brass structure and is made of fluorine rubber seal, corrosion resistance, high temperature resistance, good insulation performance; copper core coil, good heat dissipation performance, flow direction mark on the valve seat, widely used in drinking water, high-end water heaters, smart Drinking fountains, water heaters, irrigation control (gardens, farms, etc.), liquid control (pipes, artificial rivers, etc.), air control (laboratories, factories, etc.).
Feature：
Magbow
Your Best Online Business Partner
1/2” 110V AC Brass Electric Solenoid Valve Water Air Gas Fuel Normally Close N/C
This product adopts industrial-grade brass structure and is made of fluorine rubber seal, corrosion resistance, high temperature resistance, good insulation performance; copper core coil, good heat dissipation performance, flow direction mark on the valve seat, widely used in drinking water, high-end water heaters, smart Drinking fountains, water heaters, irrigation control (gardens, farms, etc.), liquid control (pipes, artificial rivers, etc.), air control (laboratories, factories, etc.).
Feature：
Compact Size, Easy to Assemble and Disassemble.
The Valve Body is Made of Brass and Has Strong Pressure Resistance,good Seal, Safe and Reliable to Use.
Each valve seat is marked with flow direction for easy operation
The Inner Hole is Machined by a Special Process, with Low Frictional Resistance, Low Starting Air Pressure and Long Service Life.
Air Solenoid Valve Has Single Control Solenoid Valve Have Internal Pilot Structure, Sliding Column Structure, Good Sealing and Responsive.
Parameter：
Size:1/2 in ,NPT Inlet and Outlet Ports
Orifice Diameter: Large internal orifice (5/8 in (16 mm) internal orifice diameter)
Body Material: Brass Stainless Steel
Cv Value: 4.8
Thread Type: NPT
Diaphragm: FKM (Viton)
Operation Mode:Normally Closed
Outer Thread Diameter / TPI : 0.84 inches / 14 TPI
Maximum Media Temperature: 265° F (130° C)
Rated Voltage:110/115/120Volt
Working Pressure:0 to 145 psi or Vacuum
Suitable Media: Water,Air,Gases,Diesel,Gasoline (with or without Ethanol),Glycol and Other media compatible with FKM/Viton
Note：
Keep the Inside of the Pipeline Clean Before Installation.
When Installing the Solenoid Valve, Teflon Tape Must Be Wound Around the Thread and the Position of the Solenoid Valve Must Be Adjusted.
Please Pay Attention to the Insulation of the Circuit.
Please Install the Solenoid Valve in the Direction of the Water Flow.
Item Specifics
UPC
Does not apply
Brand
magbow
MPN
165277-magbow
Valve Operation
Solenoid
Suitable Media
Water,Air,Gases,Diesel,Gasoline
Custom Bundle
No
Size
1/2 in ,NPT Inlet and Outlet Ports
Orifice Diameter
Large internal orifice (5/8 in (16 mm) internal orifice diameter)
Body Material
Brass Stainless Steel
Cv Value
4.8
Thread Type
NPT
Diaphragm
FKM (Viton)
Operation Mode
Normally Closed
Outer Thread Diameter / TPI
0.84 inches / 14 TPI
Maximum Media Temperature
265° F (130° C)
Rated Voltage
110/115/120Volt
Working Pressure
0 to 145 psi or Vacuum
Country/Region of Manufacture
China
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be hold until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an UPI (Unpaid case)  from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Magbow
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Other
Hot Item
New List Item
3450 RPM 1.5HP 3Phase Air Compressor Electric Motor 230/460 Volt
USD 143.00
3450 RPM Air Compressor Electric Motor 2HP Single Phase 230/115 Volt
USD 159.00
1750 RPM Air Compressor Electric Motor 1/2HP Single Phase 230/115 Volt
USD 139.00
4" x 6" Fan fold Direct Thermal Labels - White Shipping Mailing Postage Labels,
USD 18.39
3450 RPM 3HP Single Phase Air Compressor Electric Motor 208-230 Volt
USD 179.00
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
1/2” 110V AC Brass Electric Solenoid Valve Water Air Gas Fuel Normally Close N/C
This product adopts industrial-grade brass structure and is made of fluorine rubber seal, corrosion resistance, high temperature resistance, good insulation performance; copper core coil, good heat dissipation performance, flow direction mark on the valve seat, widely used in drinking water, high-end water heaters, smart Drinking fountains, water heaters, irrigation control (gardens, farms, etc.), liquid control (pipes, artificial rivers, etc.), air control (laboratories, factories, etc.).
Feature：
Compact Size, Easy to Assemble and Disassemble.
The Valve Body is Made of Brass and Has Strong Pressure Resistance,good Seal, Safe and Reliable to Use.
Each valve seat is marked with flow direction for easy operation
The Inner Hole is Machined by a Special Process, with Low Frictional Resistance, Low Starting Air Pressure and Long Service Life.
Air Solenoid Valve Has Single Control Solenoid Valve Have Internal Pilot Structure, Sliding Column Structure, Good Sealing and Responsive.
Parameter：
Size:1/2 in ,NPT Inlet and Outlet Ports
Orifice Diameter: Large internal orifice (5/8 in (16 mm) internal orifice diameter)
Body Material: Brass Stainless Steel
Cv Value: 4.8
Thread Type: NPT
Diaphragm: FKM (Viton)
Operation Mode:Normally Closed
Outer Thread Diameter / TPI : 0.84 inches / 14 TPI
Maximum Media Temperature: 265° F (130° C)
Rated Voltage:110/115/120Volt
Working Pressure:0 to 145 psi or Vacuum
Suitable Media: Water,Air,Gases,Diesel,Gasoline (with or without Ethanol),Glycol and Other media compatible with FKM/Viton
Note：
Keep the Inside of the Pipeline Clean Before Installation.
When Installing the Solenoid Valve, Teflon Tape Must Be Wound Around the Thread and the Position of the Solenoid Valve Must Be Adjusted.
Please Pay Attention to the Insulation of the Circuit.
Please Install the Solenoid Valve in the Direction of the Water Flow.
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be hold until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an UPI (Unpaid case)  from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
All rights reserved.