3/8" ID Hose BarbY Shaped Type 3 Way Brass Shut Off Ball Valve Fitting

Description

Note: It's large flow upgraded version and has increased outer diameter, about 7/16"（11mm）to combined it more closely with the hose. Relative hose shouldn't be too hard or it will be difficult to be inserted by the barbed fitting.
It won't let you down with an increase in body diameter and an increase in flow with an inner hole diameter of nearly 23/64"(9mm),and the ball bore diameter is also reached,if you pursue large flow
Each valve is tested by air tightness.If you are careful enough, you can also hear "Peng" when it is used for the first time.
The proportion of the valve installation increases, looks very thick than the first generation.
Y 3-Way Shut off Ball Valve has 2 switches, which control 2 channels respectively, and can also close one of them, as a 2 way valve,whatever you want.
This Aoaof
Y hose fitting is made of forged brass and connects and branches three hoses. This Y fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast brass. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.