Adjustable Water Pressure Regulator 0-160 PSI Lead Free Brass with oil Gauge

Description

ADJUSTABLE LEAD-FREE BRASS WATER PRESSURE REGULATOR 0-160 PSI with OIL GAUGE
BULLET POINTS
ADJUSTABLE WATER PRESSURE
- In addition to TWO EXTRA gasket strainers it comes with a screwdriver which makes simple adjustments of water pressure from 0-160PSI.
DURABLE HEAVIER PRODUCT
-We used more brass. Our new lead-free regulator contains a more durable pressure gauge with oil to prevent friction of internal components, particularly low lead content, well under the lead-free requirement and comes with  ONE YEAR WARRANTY.
US STANDARDS 2021 IMPROVED VERSION
-Compatible with U.S. 3/4" water sources. Gauge filled with oil to increase longevity and accuracy
RV WATER PRESSURE REGULATOR
-Designed for city water. RV reduces water pressure and protects your filter and hose from damage.
HIGH QUALITY MADE
-Constructed from durable (lead-free) Brass DMV metal, gauge filled with oil to increase longevity and accuracy. We check it before it leaves the factory to ensure the quality of each product is very good.
Description
Operation Principle
The operation of the pressure-reducing valve is based on the balance between two opposing forces:
1. The thrust of the spring to open the flow passage cross section.
2. The thrust of the diaphragm to close the flow passage cross section.
Operation with water flow
When opening the draw-off outlet, the force of the spring prevails over that of the diaphragm. The obturator moves downwards, thereby opening the valve to the flow of water.
The greater the demand for water, the lower the pressure under the diaphragm. This results in a greater flow of water through the passage cross section.
Operation without water flow
When closing the draw-off outlet, the downstream pressure rises and pushes the diaphragm upwards. This closes off the passage cross-section from the flow of water and keeps the pressure constant at the setting value. The slightest difference in favour of the force exercised by the diaphragm over that of the spring causes the device to close.
Instructions
Connect the female fitting on the adjustable water regulator to your water source’s hose bib.
Connect the female fitting on the water hose to the male fitting on the adjustable water regulator.
Turn on the water supply to flush the water regulator and hose for one minute. Turn off the water supply.
Connect the hose to your RV’s water inlet, and then turn on the water supply. Turn on all RC fixtures flush out of the RV plumbing–this includes turning on showers, faucets and flushing toilets.
Adjust the regulator screw (found at the top of the cap on the regulator) until it is set to the desired pressure reading.
Turn off all RV fixtures before making adjustments to the regulator screw until you reach the desired pressure reading.
Terms and Conditions.
Items will be shipped on the
same
day or next business day via USPS
1-3 Day Priority
Padded Envelope
We will be assisting our clients with
every issue
they face you can reach us thru either eBay or email.