HAROUT R DEALER'S 41 PIECE DISPLAY RING & EARRING PROPS & LOOSE HEADS WITH CZ's

Description

RITANI 35 PIECE DEALER'S RETAIL DISPLAYS
This listing is for a Ritani dealer's retail display. It comes with 41 pieces total.
It comes with a Blue Tray that measures 11" x 8 1/4
" x 1 1/4". This tray says Harout R at the top and has a slit to fit a few rings in across the top, then there are spots on the sides to put in loose heads set with Cubic Zirconia's to easily see what each ring would look like with a different center. The center of the tray is dropped down and can fit any of the included props or those props can be displayed around the base and the square can stay open to lay rings as you show your customer.
This listing also includes 12 loose heads with cubic zirconias in them.
There are 27 props included all together:
7 Used Double ring props, each prop has one slit for a ring to sit down into and a spot for a ring to be slipped through that will sit up much higher.
I have 4 brand new still packaged up.
Double ring props, each prop has one slit for a ring to sit down into and a spot for a ring to be slipped through that will sit up much higher.
All 11 of these above props are 1 1/2" x 1 1/2" x 2" and say H R on the front of each
There is 1 brand new still in the plastic double ring prop, these two rings sit side by side and the ring slides through the spot.
2 1/4" x 1 1/4" x 1 3/4"
3 Used Double ring props with two rings sitting next to each other
There are 4 used short single ring props. Each of these props
the ring slides through the spot. These props are 1 1/4" x 1 1/4" x 1 3/4".
1 used small single ring prop
There are 2 used tall single ring props. Each of these props
the ring slides through the spot. These props are 1 1/4" x 1 1/4" x 2 1/4".
1 used earring prop
4 new earring props still in the bag. All 5 earring props are 1 1/2" x 1 3/4" 2 1/4"  and say Cupcake by Harout R on the front
1 Harout R Simply Spectacular blue felt display prop
Please not all measurements are apx, they may be a 1/4" off or so. Also the height given is always to the highest point, since a lot of these props are angled