MITS AutoLab PCB Prototyping System With Camera w/9 tools

Description

MITS AutoLab PCB Prototyping System
The AutoLab is MITS' auto-tool-change machine, allowing you to mill your entire board virtually hands-free. This impressive system features 10-tool auto-tool-change, a 9x12.2x2.24 inch work area, and a standard 30X fiducial recognition camera for aligning double-sided boards. Solidly built, suprisingly precise, and with its highly competitive pricing, the AutoLab is an unparalleled value.
This system features 10-tool automatic tool change, full triple-action XYZ axis control, up to 60,000  rpm spindle
motor, and a large 9x12.2 inch work area. A 30X magnification fiducial recognition camera is
standard
for precise
alignment
of double-sided boards and easy inspection of you work right on your monitor, and MITs' proprietary DesignPro software is included. North Bay Technical also provides a Starter Kit with a
assorted tools and materials listed below - everything you need to cut your first board.
Weight 76lbs
Dimensions 23 x 17.2 x 17 in
Starter Tool Kit Includes:
(1)
Rtr-059
.059″ Router (1.5″ OAL)
Weight 0.07 lbs
Dimensions
1.5 x .125 x .125 in
(1) UEM-031
.031″ End Mill (1.42 OAL)
Weight 0.07 lbs
Dimensions
1.42 x .125 x .125 in
(1) UltraMill 9
ULTRAMILL (90° Spiral Mill) (1.42 OAL)
Weight 0.07 lbs
Dimensions
1.42 x .125 x .125 in
(1) UltraMill 6
Ultramill6 (.029″ 60° Spiral Mill) (1.42 OAL)
Weight 0.07 lbs
Dimensions
1.42 x .125 x .125 in
(1) UEM-9000
UEM-9000 (4mil to 20mil Web) 6000″ @ 0.008″ to .0200″ space (1.42 OAL)
Weight 0.07 lbs
Dimensions
1.42 x .125 x .125 in
(1) DRL-0197
.0197″ Drill (.5mm)
Weight 0.07 lbs
Dimensions
1.5 x .125 x .125 in
(1) DRL-0394
.0394″ Drill (1.0mm)
Weight 0.07 lbs
Dimensions
1.5 x .125 x .125 in
(1) DRL-0591
.0591″ Drill (1.5mm)
Weight 0.07 lbs
Dimensions
1.5 x .125 x .125 in
(1) DRL-1181
.1181″ Drill (3.0mm)
Weight 0.07 lbs
Dimensions
1.5 x .125 x .125 in
(1) CC9X12H06
FR4 Double Sided Copper Clad
Half ounce 9"x 12" 0.059" Thickness
(1) Backup Material
0.093" x 9" x 12"
Model
Auto Lab
Minimum pattern width (mm)
0.1 (4 mil)
Minimum milling width (mm)
0.1 (4 mil)
Working area (X/Y/Z) (mm)
229 x 300 x 45 *7 (9.0″ x 11.8″ x 1.8″)
Table size (X/Y) (mm)
296 x 370 (11.6″ x 14.5″)
Control axis
X, Y, Z
Control motor
Stepper Motor
Resolution (µm) *3
0.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) *1
55 (2.17″)
Spindle speed min-1 (rpm) Spindle motor
5,000 – 62,000 DC Brushless Spindle
Drilling (mm)
0.2 – 3.175 (8 – 125 mil)
Maximum drilling cycle (cycles/min.) *2
55
Maximum thickness of processed material (mm)*4
30 (1.18″)
Tool change
Automatic / 10
Milling method (Absolute)
No
Milling method (Incremental)
Yes
Compressed air (Mpa)
_
Power consumption
100 – 240 V, 50-60 Hz, 150VA
Machine dimensions W x D x H (mm)
435 x 575 x 430 (17.2″ x 23″ x 17″) With cabinet: 500 x 580 x 450 (19.7″ x 23″ x 18″)
Machine weight (kg)
Approx. 34 (76 lbs) With cabinet: Approx. 44 (99 lbs)
Interface
One USB or one RS-232C port
Standard equipment
Fiducial positioning camera 30x (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM